Load Shedding in Pakistan Explained
Load shedding, bijli band (بجلی بند), bijli ki bandish (بجلی کی بندش), electricity outage or power breakdown in Pakistan? See live reports from neighbours and today's shutdown schedule, and report it to help others nearby.
Load shedding is the planned, rotating switching-off of electricity feeders. Pakistan’s distribution companies use it to keep the grid stable when supply cannot meet demand, and to limit losses on feeders where much of the electricity is stolen or not paid for. Here is how it works and how to plan around it.
Why load shedding happens
- Demand-supply gap – on hot summer days demand can exceed what generation, transmission or a local grid station can deliver.
- AT&C losses – aggregate technical and commercial losses: power lost in old lines and transformers, plus theft (kundas) and unpaid bills. DISCOs ration supply to high-loss feeders to limit financial losses.
- Network constraints – overloaded transformers, grid stations and transmission lines.
Feeder categories
DISCOs group feeders by their loss level. Feeders with low losses get little or no load shedding; the higher a feeder’s losses, the more hours it is switched off. Industrial feeders, hospitals and other dedicated feeders follow separate rules. That is why two streets in the same city can have very different schedules.
How schedules are published
Companies publish load management schedules and one-off planned shutdowns (for maintenance and development work) on their websites, social media pages and through press releases, usually a day or two in advance. Load Shedding Pakistan collects the shutdown notices automatically and shows them on the shutdown map. Unscheduled cuts – faults, tripping and emergency load management – are not announced, which is where neighbours’ reports help.
Find your feeder name
Your electricity bill shows your 14-digit reference number, your feeder name and code, and your sub-division. Notices and schedules list feeders by name, so knowing yours tells you whether a shutdown affects you. The 118 complaint centre can also tell you your feeder’s schedule.
Protected hours and exemptions
The government and NEPRA sometimes order reduced or no load shedding at particular times – for example during sehri and iftar in Ramadan, board examinations or extreme heat – and low-loss feeders may be exempt altogether. These decisions are announced in the news and by the companies.
Tips for living with load shedding
- Size a UPS or inverter for the hours you face – see the UPS backup calculator.
- Keep phones, power banks and rechargeable lights charged before your slot.
- Run the water motor, iron and washing machine when the power is on.
- Consider rooftop solar with net metering – see the solar calculator.
- Keep the fridge closed during cuts, and in a heatwave drink water and check on older relatives.
Questions & comments
0 commentsShare what is happening: when the power went out, what your DISCO or K-Electric said (complaint number, estimated restoration time), whether it is scheduled load shedding. Add your mobile number below to get updates – it stays private and is never shown on the site.
- No comments yet. Start the conversation – your neighbours will thank you.